KLH Model 5 Acoustic Suspension design floor standing speakers. Includes dedicated stands.
Robert and Mike at 905-503-0850.
The Model Five acoustic suspension speaker is known as one of the finest and most sought-after speakers for audiophiles, both new and seasoned. Our updated version of this classic speaker has real wood veneers, cast aluminum baskets, and uses acoustic suspension design principles made famous by founder Henry Kloss.
In stock in gorgeous West African Mahogany finish, allowing the loudspeaker to blend with all home decor. West African Mahogany finish is complemented by an Old-World Linen grille cloth that will stop you in your tracks.
- Iconic Mid-Century Modern Styling
- Acoustic Suspension Design – The most accurate and linear enclosure design available today
- Three-Position Acoustic Balance Control to tailor the loudspeaker’s output for the most difficult acoustic environments
- Dedicated midrange driver to reproduce the critical mid-frequency band
- Non-Resonant Die-Cast Aluminum Midrange & Woofer Frames
- Die-Cast Aluminum Tweeter Faceplate
- KLH cabinetry featuring a structurally reinforced ¾” MDF enclosure
- Thirteen component network using high-quality iron-core inductors & Mylar capacitors
- Each speaker includes its own 5° slant riser base made of powder coated 14-gauge steel
- Low-profile magnet attached grille
- 10 Year Warranty.
Low Frequency Extension: In-Room Sensitivity: Free-field Sensitivity:
Power Handling: Recommended Amplification: In-Room Maximum SPL: Impedance:
High Frequency Driver: Mid Frequency Driver: Low Frequency Driver:
Specifications subject to change without notice.
42Hz – 20,000Hz +/- 3dB -10dB @ 32Hz
90.5dB @2.83V / 1M 87.5dB @ 2.83V / 1M
200 Watts / 800 Watts Peak
20 Watts to 200 Watts
6 Ohms (3.5 ohm minimum @140 Hz) 140° Degrees
Three-Position Acoustic Balance Control
MF: 380Hz (2nd Order Electro-Acoustic) HF: 2,850Hz (2nd Order Electro-Acoustic)
1" Aluminum Dome with Soft Rubber Suspension
4" Pulp-Paper Cone with Reverse Roll Rubber Suspension
10" Pulp-Paper Cone with ReverseRoll Rubber Suspension, 2" Diameter Flat-Wire Voice Coil
Structurally Reinforced 3⁄4" Medium Density Fiberboard
Five-Way Gold-Plated Binding Posts
34.25" (87.0cm) w/ Included Riser Base 26.0" (66cm) w/o Riser Base
13.0" (33.0cm) w/ Included Riser Base 11.5" (29.2cm) w/o Riser Base
44Ibs. (20.0kg) w/o Riser Base
52Ibs. (23.6kg) w/ Included Riser Base
5° Slant Riser Base